The sensor range for the automatic lid opening and closing is adjustable, with a total of 11 levels. The corresponding detection distances for each level are as follows:
• L1: 1–7.9 inches
• L2: 1–7.9 inches
• L3: 1–9.8 inches
• L4: 1–11.8 inches
• L5: 7.9–13.8 inches
• L6: 13.8–17.7 inches
• L7: 15.7–19.7 inches (Default setting)
• L8: 17.7–23.6 inches
• L9: 19.7–27.6 inches
• L10: 23.6–29.5 inches
• L11: 31.5–35.4 inches
Please note: The actual detection range may vary slightly due to environmental factors.
The default setting is level 7. If you need to adjust it, please follow these steps (you may refer to the attached video for guidance):
- Restart the toilet by unplugging it and then plugging it back in.
- Wait for the LED panel to show the temperature. As soon as the temperature appears, press and hold the "Feminine Wash" button until you hear a beep beep—this indicates that the adjustment mode is activated. (This step must be completed within 30 seconds.) The LED panel will show "07", meaning the current setting is L7 by default.
- Press the "Rear Wash" button once to increase the level or the "Feminine Wash" button once to decrease the level. Make sure to press only once for each adjustment. (You will see the number change on the display panel.)
- Once you have set your desired level, press the power button in the center to save the settings.
